A liquid-crystal display (LCD) is a flat panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals. Liquid crystals do not emit light directly, instead using a backlight or reflector to produce images in color or monochrome.

A TFT display is a Thin-Film-Transistor LCD, which improves image qualities (over basic LCDs) such as addressability and contrast.

OLED displays use organic light-emitting diodes whose emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. 

A nit is a nickname for cd/m² (candelas per meter squared), the unit of measure for luminance (of a display, in General Digital’s case).

Because of the nature of rugged applications—often involving exposure to vibration and shock—we strongly recommend the use of DVI video input. DVI features a locking connector, ensuring continuous functionality in a wide variety of “active” environments. Upon request, we will supply a DVI-to-HDMI adaptor with your order.

Although it’s true that optical bonding is a highly-effective display enhancement (increasing contrast/readability and ruggedization of the unit, while decreasing distracting internal and external reflections), for some applications it is an unnecessary expense. A typical office or lab setting may not present many of the factors that an outdoor or rapidly changing environment will.

However, General Digital will often include pricing for optical bonding as an option, so you can decide if the extra cost is justified for your application.

Obsolescence of various components cannot be avoided. For decades, we have supported our products, long after component obsolescence, with like or equivalent replacement components. These like or equivalent components will always offer form, fit and function compatibility of the end product.

Once informed of upcoming component obsolescence, General Digital notifies all affected customers and offers last-time-buy (LTB) opportunities. Customers are occasionally given the opportunity to opt-in to a last-time-stocking option, wherein we purchase the discontinued components, and hold them until needed by the customer. We don’t charge the customer until we use the components in their finished product.

NVIS compliance implies full compliance with MIL-STD-3009, as well as certification at an independent lab.

NVIS compatible implies full compliance with MIL-STD-3009, but not independently certified.

Although General Digital’s clientele is largely military (both domestic and international), the only products included on the USML (United States Munitions List) are monitors that are NVIS (Night Vision Imaging System) or NVG (Night Vision Goggle) compatible, or those that are designed specifically and exclusively for a military application. With this in mind, even though a monitor may be used by the military, it may not be listed on the USML for ITAR (International Traffic in Arms Regulations) or the DDTC (Directorate of Defense Trade Controls).

Because the majority of our products are LCD monitors that contain no computers, they are considered “EAR99.” This means that though our monitors might be subject to EAR (Export Administration Regulations), they are exempt and not included on the CCL (Commerce Control List) with a specific ECCN (Export Control Classification Number).

Read our blog, Understanding ITAR, for more information.

In short, it is control of the software development process from beginning to end.

The full life cycle encompasses requirements, design, coding, testing and documentation.

Sourcing from a single company creates better quality and efficiencies. This, in turn, leads to faster completion, which means a greater liklihood that product or software gets to market faster, and at a reduced cost.

A safety-critical system or life-critical system is one whose failure or malfunction may result in one (or more) of the following outcomes: death or serious injury to people; loss or severe damage to equipment/property; environmental harm.

There is a risk analysis that General Digital can do for you to determine if you are required to have a safety-critical standard in place, and the level of criticality required.

If you aren’t sure, it’s likely that you could use a Processes and Procedure Analysis.

General Digital offers a no-obligation SSRA (Software Services Requirements Analysis), which identifies areas that you can handle in-house, and other areas where you would benefit by retaining outside help.

Independent Verification & Validation are procedures used together for checking that a product, service, or system meets stated requirements and specifications, and that it fulfills its intended purpose.

“Independence” is required for safety-critical environments that are governed by corporate or government entities, such as the FDA (Food & Drug Administration) for medical devices, and the FAA (Federal Aviation Administration) for avionics and aerospace applications.

Most products come with a standard 1-year manufacturer’s warranty from the day of shipment from General Digital. Extended warranties are available upon request, where applicable.

Additionally, our Software Services Group has its own Terms and Conditions.

General Digital is a one-stop shop!

All three of its business units—Display Systems, Software Services, and Optical Bonding Laboratories—are under one roof. This allows for efficient and effective interdisciplinary engineering, support and design efforts for seemless implementation.