| 5.0" Sunlight Readable, LED Backlit, Display Head Assembly with Intelligent Controller |
| 6.5" Waterproof, NVIS, Sunlight Readable, LED Backlit LCD Monitor |
| 15.0" Waterproof NEMA4X Sunlight Readable LCD Monitor |
| 15.0" Open Frame Sunlight Readable LCD Monitor Kit |
| 19.0" Rack Mount Mil Spec LCD Monitor |
| 21.5" Touch Interactive, Quad Input, NVIS/Daylight Readable, Mil-Spec LCD Monitor |
| 21.5" Touch Interactive, NVIS/Daylight Readable, Standalone/Mountable, Mil-Spec LCD Monitor |
| 24.0" Panel Mount, Mil-Spec LCD Monitor |
5.0" Sunlight Readable, LED Backlit, Display Head Assembly with Intelligent Controller
Part Number 90-4050-001
 General Digital has developed a highly integrated and intelligent display head assembly for deployment in an airborne / cockpit application. In order to fit the 5" active matrix LCD display into a 4 x 5 ATI enclosure, the LCD had to be laser cut in one corner. To make the LCD sunlight readable, we manufactured our own low power, direct-lit, LED backlight, which efficiently provides high brightness without creating or dissipating undesired heat. An NVIS compatible version of the backlight is also available as an option. A microprocessor-based controller automatically adjusts the backlight brightness based on ambient light and temperature conditions reported from integrated sensors. The controller also controls an optical heater which is integrated to extend the LCD’s cold temperature operating range down to -40° C. The heater is optically bonded to the LCD to nearly eliminate any internal reflections produced by exposure to direct sunlight, thereby enhancing the LCD’s contrast in high ambient light environments.
 FEATURES
- 5.0" diagonal LCD
- 640 x 480 (VGA) resolution
- Laser cut LCD to fit customer-specified 4 x 5 ATI enclosure
- Optically bonded ITO heater to LCD
- Improved contrast by reducing internal reflections
- Ruggedized display assembly
- Custom LED backlight
- Direct backlit design
- Sunlight readable performance – up to 2200 nits @ 5.5 watts; up to 1000 nits @ TBD watts
- Optional NVIS enhancement
- Intelligent, microprocessor based heater / backlight controller
- Allows cold temperature operation down to –40° C
- Adjusts brightness based on customer-specified algorithm and ambient light sensor
- Integrated thermal sensor provides control loop for heater performance, automatically adjusting backlight brightness to prevent overheating the LCD due to increased ambient temperature or solar load
TYPICAL APPLICATIONS
DATA SHEET
6.5" Waterproof, NVIS, Sunlight Readable, LED Backlit LCD Monitor
Part Number 90-3064-012
Model Number SBS-06V-907-71-00-15-04-SA31
 General Digital recently redesigned our Barracuda Series enclosures to make them smaller, lighter and less expensive. The 90-3064-012 monitor has been customized specifically for use in a Military Mobile Ground Station application. This monitor is designed to withstand extreme outdoor environments and high ambient light while installed in a mobile transit case. All of the inputs are waterproof except for the composite input, which has a dust cap to keep moisture, sand, and dust from entering. The composite video connector (BNC) is an optional feature that provides a quick connect with a threaded connector.
FEATURES:
- 6.5" diagonal LCD
- 640 X 480 (VGA) resolution
- 600:1 contrast ratio
- Viewing angles: 80° horizontal; +80°, –60° vertical
- Sunlight readable LED backlight produces 900+ nits
- Ruggedized IP67-sealed enclosure (submersible to a depth of 1 meter for 30 minutes)
- Video Inputs:
- VGA (waterproof)
- DVI-D (waterproof)
- Composite (BNC - standard 75 ohm with dust cap)
- Easy mounting design (VESA)
- MIL-STD-3009 Class Type II NVIS (NVG)-compatible backlight
- Switchable between day & night mode and NVIS mode
- Fully dimmable (~1000:1)
- Antireflective glass overlay protects LCD
- Environmental performance
- Storage temperature -30° C ~ 80° C
- Operating temperature: -20° C ~ 70° C
- 15,000 feet operating altitude
- 40,000 feet storage altitude (non-operating)
- Long lifecycle product
OPTIONS:
- Optical Bonding
- EMI
- ITO heater (for colder operating temperatures)
- Sunlight readable (LED backlight only)
- XGA resolution
TYPICAL APPLICATIONS:
- Marine
- Military (NAVY, ARMY)
- Oil & gas
- Government
15.0" Waterproof NEMA4X Sunlight Readable LCD Monitor
Part Number 90-400-115 (Impact Monitor Kit) + 90-1212-001 (Stainless Steel Enclosure)
Model Number MK-15X-947-60-00-00-04-SP30-114 + Custom Stainless Steel Enclosure
 General Digital adapted our sunlight readable Impact Monitor Kit so that we could integrate it into a customer-specified stainless steel, waterproof enclosure. The intent of this design was to provide the customer with a solution capable of surviving harsh outdoor environments including rain, sleet, and snow while still being viewable in direct sunlight.
FEATURES:
- 15.0" Diagonal Transflective LCD
- 1024 x 768 (XGA) resolution
- 600 Nits (dark room), 1200 nits (direct sunlight)
- Sunlight Readable
- Ruggedized stainless steel NEMA4X sealed enclosure
- Antireflective glass overlay to protect the LCD
- Storage Temperature -20° C ~ 80° C
- Operating Temperature: -10° C ~ 70° C
OPTIONS:
- Optical bonding
- Ambient light sensor for automatic brightness adjustment
- Resistive touch screen
- 2" conduit connector for wire and cable installation
15.0" Open Frame Sunlight Readable LCD Monitor Kit
Part Number 90-400-105
Model Number MK-15X-947-60-00-00-04-SP30-114
General Digital had developed this 15" Sunlight Readable Monitor Kit (Open Frame) for an outdoor Pneumatic Tube Systems application. The customer had problems reading their existing displays and had asked General Digital to provide to them a custom Monitor Kit that can be installed into their existing enclosure for use in Banking and Pharmaceutical Drive Through Systems.
FEATURES:
- 15" diagonal transflective LCD
- 1024 X 768 (XGA) resolution
- 600 nits (dark room), 1200 nits (direct sunlight)
- 500:1 contrast ratio (dark room)
- Viewing angle: ±80° horizontal, +80°/60° vertical
- Sunlight readable
- Ruggedized open frame solution
- Video inputs:
- VGA
- DVI-D
- S-Video (4 Pin Mini Din)
- Composite (BNC)
- Optional front bezel
- Easy mounting design
- Antireflective protective glass overlay for LCD
- Ambient light sensor for automatic brightness adjustment
- Operating temperature: –10° C ~ 70° C
- 12 Volt desktop power supply
- Long lifecycle product
OPTIONS:
- Integrated touch screen (resistive, surface capacitive, IR, projected capacitive)
- Optical Bonding (maintains contrast, provides ruggedness, eliminates humidity between overlay or touch screen)
- MIL-STD-3009 Class B Type II NVIS (NVG) compatible backlight
TYPICAL APPLICATIONS:
- Kiosk
- Banking
- Drive-through pharmaceutical
- Industrial
19.0" Rack Mount Mil-Spec LCD Monitor
Part Number 90-3190-003
Model Number CMR-19W-701-62-00-54-26-EP44-139
 General Digital was tasked with the challenge of creating a monitor substantial enough to endure military Naval use. Starting with our standard military-grade Saber RackMount 901D, we designed and built a drip- and splash-proof enclosure, complete with sealed and tethered connector covers. We then equipped this rugged rack mount unit with both a compact flash card reader and USB port behind a customer-accessible field door on its front bezel.
FEATURES:
- 19" diagonal LCD
- 1280 x 1024 (SXGA) resolution
- 350 nits (LED backlit)
- 1000:1 contrast ratio (dark room)
- Viewing angle: ±85° horizontal, ±80° vertical
 Designed with the intent to satisfy a multitude of military standard requirements
- MIL-STD-461
- MIL-STD-810
- MIL-STD-901D
 Numerous Video Inputs
- VGA (HD-15 connector)
- RGB Sync-on-Green (3 TNC connectors)
- Composite NTSC, PAL, SECAM, RS-170
- EMI filter (ITO coated glass)
OPTIONS:
- Compact flash card reader
- USB Port
DOWNLOAD:
21.5" Touch Interactive, Quad Input, NVIS/Daylight Readable, Mil-Spec LCD Monitor
Part Number 90-3215-002
 General Digital was commissioned by a military prime contractor to develop a militarized version of our TwoView Micro product, featuring a single 21.5" display capable of use in daylight readable and NVIS environments. The product was designed specifically for installation in a military ground vehicle. One of the unique features of this product is its ability to display four separate video sources simultaneously.
FEATURES:
- 21.5" diagonal LCD
- 1920 x 1080 (FHD) resolution
- 400 nits (LED backlit)
- 5000:1 contrast
- Viewing angle: ±89° horizontal, ±89° vertical
- MIL-STD-3009 Class B Type II LED NVIS (NVG) compatible backlight
- Optically bonded resistive touch screen (touch enabled in full DVI-D input only)
- Improves contrast in high ambient light by minimizing internal reflections
- Provides protection for the LCD
- Designed to meet MIL-STD-461E
- ITO glass heater
- Extends cold operating temperature of LCD from 0° C ~ –45° C
- Custom designed, ceiling mounted flip-down monitor
- Ruggedized display assembly
- Special locking mechanism ensures LCD will remain in stowed position even when exposed to typical shock experienced during mechanized ground transportation
- Knurled handle allows operators to intuitively unlock LCD for deployment / operation
- Two military circular connectors (P/N D38999)
- 1 - Power (24 VDC)
- 1- Serial (video controller communication) / USB (touch controller) / factory programming port
- Quad view input [3X HD-SDI (BNC), 1X DVI-D]
- Allows simultaneous display from up to four independent video sources
- Switchable between day and night (NVIS) mode
- Analog (PWM) dimming control of backlight in both daylight and NVIS modes
- 1 field, 15ms latency
- Custom microprocessor-based multifunction controller provides:
- SR/NVIS LED controlled backlight
- Heater control
- Firmware upgrade
- Serial/master control
- Serial control for video board
- Touch USB control
- Keypad control
- Designed to meet IP65 wash down requirements (not submersible)
- Desert tan powder coat (other colors optional)
OPTIONS
- Quad view capability can be integrated into a variety of General Digital’s enclosure styles
DRAWING
21.5" Touch Interactive, NVIS/Daylight Readable, Standalone/Mountable, Mil-Spec LCD Monitor
Part Number 90-3215-003
Designed to meet specific requirements and specifications for a flight simulator application, General Digital’s new 21.5" ruggedized LCD monitor boasts a 1920 x 1080 full high definition resolution, and a sunlight readable LED night vision goggle-compatible backlight. This second generation LED / NVIS backlight provides more brightness, better uniformity and less power than the original backlight, which was designed for maritime applications. Configurations include an LED/NVIS display head assembly (with optional backlight driver board), and a standalone / mountable ruggedized enclosure, as pictured here.
FEATURES:
- 21.5" diagonal LCD
- 1920 x 1080 (FHD) resolution
- 400 nits (LED backlit)
- 5000:1 contrast
- Viewing angle: ±89° horizontal, ±89° vertical
- MIL-STD-3009 Class B Type II LED NVIS (NVG) compatible backlight
- Surface capacitive touch screen with antireflective coating
- Ruggedized enclosure
- Switchable between day and night (NVIS) mode
- Fully Dimmable
- Storage Temperature: -20° to +60° C
- Operating Temperature: 0° to +50° C
- Video Inputs: VGA, DVI-D, and Composite (BNC)
- Easy mounting design (VESA)
- Long lifecycle product
APPLICATIONS
- Simulation, Military, Government
OPTIONS
- Optical Bonding, EMI, ITO Heater (for Colder Operating Temperatures), Sunlight Readable LED Backlight Only, PCAP Multi-Touch
24.0" Panel Mount, Mil-Spec LCD Monitor
Part Number 90-3240-007
Model Number CMP-24D-829-67-00-55-94-IA43-126
 General Digital was challenged by a military prime contractor to manufacture a high definition 24.0" diagonal LCD monitor, suitable for operation in military Naval vessels. The monitor is designed with the intent of meeting a multitude of MIL-STD requirements (see below). In addition, this monitor features a variety of value-add improvements such as an integrated DVI fiber optic receiver (supports long distance video), optically bonded EMI filter, conformally-coated printed circuit boards, and more.
FEATURES:
- 24" Diagonal LCD
- Full high definition, 1920 x 1080 pixel resolution
- 300 nit LED backlight
- High contrast ratio LCD: 3000:1
- Wide viewing angle LCD: ±89° horizontal, ±89° vertical
- Designed with the intent to satisfy a multitude of military standard requirements
- D-03-003-005/SF-000; General Safety per General Electrical Specification for Canadian Forces Ships
- MIL-STD-810, method 507: Humidity up to 95% RH condensing
- MIL-STD-810, method 506, Procedure III: drip proof up to an inclination of 15°
- MIL-STD-810, method 501 Procedure II: operating temperature from 0° C to 60° C
- MIL-STD-810, method 508 and MIL-HDBK-454 Guideline 4 for fungus and microbial growth
- MIL-STD-740-2 for Type III equipment: Structural noise
- MIL-STD-461 (CE 102, CS 101, CS 114, CS 116, RE 101, RE 102, RS 101, RS 103): EMI/EMC
- MIL-STD-810, Method 503, Procedure II: Temperature Shock
- MIL-STD-810, Method 507 : Humidity (Storage and Transportation) up to 100% RH condensing
- MIL-STD-810, Method 500 Procedure I and III: Up to altitude of 4.6 kilometers
- MIL-STD-810, Method 516, Procedures IV, V, VI: Shock (Storage and Transportation)
- MIL-STD-810, Method 514, Procedure II: Vibration, 1.0 inch circular vertical motion (at a frequency of 5Hz or 300 RPM) for a duration of 20 minutes
- Optically bonded, chemically strengthened, glass EMI filter
- Increased contrast due to optical bond which significantly reduces internal reflections
- Ruggedized LCD display assembly due to optical bonded, chemically strengthened EMI filter
- Silver mesh EMI filter designed to satisfy MIL-STD-461F (EMI/EMC)
- Internal DVI-fiber optic extension receiver for long distance video cabling
- Conformal-coated printed circuit boards to meet fungus / microbial requirements
- Panel mount enclosure (sealed from the front) with louvered ventilation holes
- Threaded studs on rear of bezel facilitates mounting
- Internal AC-DC, power factor corrected power supply
- Sealed military-style circular connectors
|
