SlimLine Lite II™
Rugged, 2U Rack Mount, Flip-up Flat Panel
LCD Monitor with Integral Keyboard and Trackball
 · Low
Profile 2U (3.50") Flip-up LCD Enclosure
· Rugged All-Metal Construction
· Integral Keyboard with Trackball
(Commercial, Industrial, Military Grades)
· Use with Computer as a Rack Mount or Standalone
Monitor / Keyboard
· Torque-Adjustable Friction Hinges (up to
80 in·lbs. each)
· Total Design Control Facilitates Customization
· Promotes Configuration Control and Extended Product Life Cycle
· LCD Display Sizes from 15.0" to 20.1" (ask about
other sizes)
· Protective Glass Overlay with Sealed Gasket on Select Models
· High Performance LCD Controller
· Supports Resolutions Up to 1920 x 1200 Pixels
(Scaled)
· Supports Separate, Composite, Sync-on-Green
and STANAG 3350 A, B, C SoG Analog Video
· Advanced Imaging Features
· Laptop-style Enclosure Requires Least Amount of Operator Workspace in its Class
· Most Keyboard / Trackballs Meet Military
Standards for Sealing and Shock / Vibration
· Several
Models Customer Certified to MIL-STD-901D, MIL-STD-810F, MIL-STD-461E
and TEMPEST Level 2
· Optional CAC (Common Access Card) Reader
Utilizing ActivIdentity® Smart
Card Readers
· Optional Support for NTSC, PAL, RS-170, SECAM,
and S-Video Composite Live Video
· Optional Support for DVI-A (Analog), DVI-D
(Digital) and DVI-I (Integrated) Video
· Optional Support for HD-SDI (High Definition)
and SD-SDI (Standard Definition) Serial Digital Interface Video
· Optional Support for HDMI (High Definition
Multimedia Interface) Video
 · Optional Night Vision (NVIS) Goggle Compatibility per MIL-STD-3009
· Optional Integrated 4-Port KVM Switch
· Optional LED
Backlight for:
- Low Power Consumption
- Mercury-free Applications
- Daylight/Sunlight Readable Levels of Brightness
· Standalone and Rack Mount Power Supplies
Available
· Cable Management System and MIL-901 Enhancement Package Available
· Many More Options and Accessories Available
· Private Labeling Available
Dependable and Compact “All-In-One”
Configured with our Rack Adaptor,
the low profile SlimLine Lite II™ is the premiere, fully-integrated
LCD monitor/keyboard/pointing device for 19" rack chassis applications.
Although it integrates many of the same components as a laptop (i.e.,
LCD, keyboard, pointing device) and physically resembles one as well,
its 2U (3.50") high enclosure has been designed specifically to
endure the harsh environments of industrial and military (COTS) applications.
The flip-up display
head folds over the keyboard and pivots up (see friction hinges)
to allow operators to optimize the viewing angle. Our design techniques also
enable the smallest enclosure footprint (height and depth) in the industry.
Locking
style connectors for all interfaces are located at the back of the case to
facilitate cable management schemes. Use of Ny-lock hardware and isolation
dampening materials further improve the durability.
 The Rack Adaptor facilitates
installation of the SlimLine Lite II™ into a 19" RETMA rack,
functioning as both a drawer and a protective case. The SlimLine™ mounts
to the Adaptor via a pair of integrated, ball bearing slides that permit
the monitor/keyboard to be slid in and out of the rack. A hinged bezel prevents
the SlimLine™ from
moving either horizontally or vertically when in the stowed position. A power
supply accessory (PS-1U-1275-PFC) is optionally available
for attachment to the Rack Adaptor.
AMTFT LCD Screens
General Digital™ integrates the latest advances in LCD display
technology in virtually any size you require. Our stock offering sizes
range from 15.0" to 20.1" (diagonal viewing area). These panels
provide the equivalent viewing area of much larger CRTs. All of our active
matrix TFT LCD panels offer up to 16.7 million colors, wide viewing angles,
and fast response times (suitable for live video). We qualify multiple
sources of supply to ensure product availability and long life. If
our stock offering does not suit your needs in terms of size, fit or
function, please contact a Sales
Engineer and we will work with you to configure a system to your specifications.
Video Support
All standard SlimLine Lite II™ monitors support interlaced and
non-interlaced analog video (Separate, Composite, Sync-on-Green). Support
for STANAG 3350 A, B and C Analog SoG video is also included as a standard
feature. In addition, they can be optionally configured
to support analog, digital and integrated video (DVI-A, DVI-D, DVI-I),
as well as serial digital interface (HD-SDI, SD-SDI) video.
Live Video Support
 The
SlimLine Lite II™ can be optionally configured to support NTSC, PAL, RS-170, and SECAM
video in composite video or S-video format. The response time of the
active matrix TFT makes it the ideal platform for live video input.
High Performance LCD Controller
Internal to our LCD monitor is an LCD controller that converts analog video signals
into the proper digital signals required to drive the display. It is the LCD
controller that enables the LCD monitor to function as a direct replacement
for the traditional CRT. The controller provides intuitive operation of its
controls and calibration through the use of a membrane pad and a series of
on-screen menus. All models support the following display image controls: auto
and manual setup, brightness, contrast, horizontal position, vertical position,
tuning, size, individual RGB adjust, image expansion on/off, system information,
run-time counter, and signal level. Advanced features are supported on a selective
basis (image rotate and invert, audio controls, advanced scaling).
Protective Glass & Sealed Gasket
(On Select
Models)
General Digital™ protects your 15" display (or 17" LCD with a
Special Display Overlay) by adhering a piece of glass to the surface of the LCD
panel to guard the liquid crystal material from making direct contact with foreign
objects. In addition, a sealed gasket is installed between the display and bezel
to protect the monitor’s electronics from dust, liquids (e.g., spilled coffee)
or other debris.
Metal Construction
General Digital’s™ rugged aluminum enclosures are designed
to withstand the rigors of commercial, industrial, and military (COTS)
environments alike. Our enclosures are completely irridited to provide
protection from corrosion and improve shielding properties where parts
make contact with one another. All external surfaces are finished with
a durable black powder coat.  Unlike
plastic enclosures (commodity products), whose mold is usually designed
for a specific display and control electronics, our military-grade modular
enclosures offer superior configuration flexibility. This modular and
flexible design also permits us to introduce contemporary technologies
without requiring extensive redesign. Our products are intentionally
designed to support LCD displays (and other electronics) from numerous
manufacturers. This capability enables us to minimize the impact of a
single supplier’s decision to obsolete, allocate or redesign their display,
upon our ability to maintain configuration control or extend the manufacture
life of our products.
Integral Keyboard/Trackball
General Digital™ offers three grades of keyboards (commercial, industrial
and military) and a trackball pointing device for
integration into our standard configurations. Many keyboard / trackballs
meet military standards for sealing and shock and vibration. (For more details,
see the Keyboard/Pointing
Device Table.)
Friction Hinges
The display head is mounted to the main enclosure via a pair of custom
friction hinges that enable the display to pivot. The rugged hinges are
constructed from light weight aluminum and are user-adjustable, providing
torque settings up to 80 in·lbs. A tubular shaft at the center of the hinge allows for
cable routing, thereby improving cable shielding and minimizing cable chaffing.
The design of the hinges prevents backlash or freeplay, reduces spring back
and produces a constant torque for over 25,000 cycles (typical).
Total Design Control
General Digital™ gladly offers its engineering services to customers
who require special customization of our devices to meet their commercial,
industrial or military requirements. Please speak with
a Sales Engineer for additional details.
Configuration
Control & Product Longevity
We at General Digital™ are completely responsible
for the design and manufacturing of our products, allowing
us to maintain nearly total control of their future. Our
experience supporting Department of Defense programs has taught us the value
of designing products with foresight so that they can be
manufactured, serviced and upgraded for many years. Though
the market introduces new innovations and product upgrades
at an alarming rate, our product management team knows
the importance of proactive customer notification and can
offer product adaptation with similar or equivalent performance
before designs become obsolete, thereby extending the product
life cycle.
Private Labeling
General Digital™ encourages relationships with Original Equipment
Manufacturers (OEMs) and other organizations, and is willing to maintain
your company identity (private label) on our products. Please speak with
a Sales
Engineer for additional information.
Options & Accessories
A plethora of options and accessories are offered in support of all General Digital™ products:
ActivIdentity® (formerly ActivCard®) Smart Card (CAC:
Common Access Card) reader, vandal shields, EMI / RFI shields, antireflective
coatings / antiglare etches, touch screens, power supplies, keyboards / pointing
devices, rack slides, video / serial / power cables and more. Please speak with
a Sales Engineer or visit our Options
and Accessories page for further details.
|
SlimLine Lite II™